Green IT covers the practices that reduce the environmental impact of digital technology across its whole life cycle: the manufacture, use and end of life of equipment, networks, data centres and software. In France, digital technology accounts for 4.4% of the national carbon footprint in 2022 according to ADEME, and equipment manufacturing makes up most of it. For an organisation, the first levers are to extend the life of its equipment, buy refurbished, measure its consumption and choose a host that is transparent about its energy.
This guide sets out the definition, the reference figures with their scopes, the levers for a company or a local authority, the regulatory framework and the pitfalls. Where two studies diverge, we say so, so that you know which figure to rely on.
What is Green IT?
Green IT, or green computing, means reducing the environmental footprint of digital equipment, infrastructure and services. It is best thought of in life-cycle terms: a computer weighs on the climate and on resources from the moment it is manufactured, not only when it is plugged in.
Three neighbouring notions overlap without being the same:
- Responsible digital is the broadest approach. It adds social and ethical dimensions (accessibility, inclusion, data use) to the environmental one. Green IT is its environmental component.
- Digital sobriety acts on usage and on the volume of equipment. We covered it in our article on digital sobriety, which we do not repeat here.
- Eco-design acts on how a service is built. See our guide to web eco-design.
Green IT therefore focuses mainly on what organisations control directly: their equipment, their purchasing, their hosting and their software. It is also one of the two sides of twin transformation, which links digital transformation and the ecological transition.
The footprint of digital technology in France and worldwide
In France: 2.5% or 4.4%, depending on scope
Two figures circulate, and you have probably come across both. They do not contradict each other. The first ADEME-Arcep study, published in January 2022, put digital technology at 17.2 Mt CO2e in 2020, or 2.5% of France’s carbon footprint. Its scope was limited to devices and infrastructure located in France, and counted only the data centres on French territory.
The update published by ADEME in January 2025 covers 2022 and includes data centres located abroad, which host about 53% of French usage according to ADEME estimates. The result: 29.5 Mt CO2e, or 4.4% of the national carbon footprint, slightly less than the total emissions of heavy goods vehicles. ADEME specifies that this result is 70% higher than that of the previous study, mainly because of data centres but also because of a revised allocation for televisions. Comparing 2.5% with 4.4% without accounting for this change of scope would therefore overstate the real increase.
The same update estimates that digital services account for 11% of French electricity consumption, or 51.5 TWh, and 64.9 TWh (14.3%) once foreign data centres are added. Per inhabitant, that comes to 434 kg CO2e a year. The 2023 forward-looking study foresees, without action, a threefold increase in the carbon footprint between 2020 and 2050 in the business-as-usual scenario. These studies describe themselves as conservative, excluding generative AI and networks outside France (sources: ADEME, 2022 update and Arcep).
Worldwide: the references diverge depending on what they count
The reference study on digital technology worldwide remains that of GreenIT.fr, dated 2019. It estimates, for 2019, about 1,400 million tonnes of greenhouse gases, or 3.8% of global emissions, 4.2% of primary energy and 1,300 TWh of electricity (5.5% of global consumption), for 34 billion devices and 4.1 billion users. It projected 5.5% of GHG emissions in 2025, which is a 2019 projection and not a measurement. It is starting to date, and its scope excludes the recent rise of AI (source: GreenIT.fr, 2019 summary).
The International Energy Agency does not measure the same thing: only the electricity used by data centres. It puts them at 415 TWh in 2024, about 1.5% of global electricity consumption, with an expected rise to about 945 TWh in 2030 in its base case. Emissions linked to that electricity would go from about 180 Mt to 300 Mt by 2035, a level the IEA places below 1.5% of energy-sector emissions (source: IEA, Energy and AI). The three series cannot be added together or compared directly.
Where the impact is concentrated: devices, networks, data centres
According to the 2022 ADEME update, with the scope extended to foreign data centres, devices account for 50% of the carbon footprint of digital technology in France, data centres 46% and networks 4%. By life-cycle phase, manufacturing weighs 60% and use 40%.
| Study | Scope | What it shows |
|---|---|---|
| ADEME-Arcep (2022) | France, 2020, French data centres only | Nearly 80% of emissions come from the manufacture of user equipment |
| ADEME (2025) | France, 2022, foreign data centres included | Devices 50%, data centres 46%, networks 4%. Manufacturing 60%, use 40% |
| GreenIT.fr (2019) | World, 2019 | The manufacture of user equipment is the largest source of impact (39% of GHG emissions), ahead of its electricity consumption |
The studies agree on one point: it is users’ equipment, and above all its manufacture, that weighs the most. They diverge on the rest. GreenIT.fr ranks network electricity consumption ahead of that of IT centres, whereas ADEME attributes only 4% to networks, specifying that it does not count networks outside France. The share of data centres rises quickly with imported usage, and ADEME notes that, for 30% more final energy consumption, emissions increase by 70%, because of the carbon-intensive electricity mixes of the United States and China.
The practical consequence for an organisation: most of what matters is decided by the equipment fleet, then by hosting. Renewing equipment more often than necessary quickly cancels the gains made elsewhere.
What an organisation can do for a practical Green IT
Extend equipment life and buy refurbished
Since manufacturing accounts for most of the impact of devices, the most reliable lever is to keep them longer. In practice: rethink depreciation periods, repair before replacing, write update requirements into purchasing contracts, and reassign workstations rather than renew them. When buying, refurbished equipment avoids a new manufacture, with one reservation: the benefit depends on what is replaced inside the device and on how long it is actually used afterwards. A refurbished device sold with a clear warranty and used for a long time remains the favourable case.
Choose your hosting and your cloud
Data centres represent 46% of the footprint of French digital technology in the ADEME update, and their electricity demand is rising worldwide. The questions to put to a host cover five points.
- PUE (Power Usage Effectiveness) compares the total energy of a site with that of the IT equipment alone. The closer it gets to 1, the less cooling and losses consume. It says nothing about carbon, water or the manufacture of servers.
- Energy: the share of renewable electricity, but above all the electricity mix of the host country. ADEME shows that the mix at the hosting location weighs heavily on emissions.
- Cooling: water consumption (the WUE indicator) and reuse of waste heat. The REEN law makes a reduced electricity tax rate for data centres conditional on these criteria.
- Location: it affects the electricity mix, but also latency and jurisdiction. Our article on data sovereignty points out that servers in France do not mean legal protection.
- Labels and certifications, to be checked at source and read for their scope.
The European Code of Conduct on Data Centre Energy Efficiency is a voluntary programme run by the Joint Research Centre, with more than 500 participating data centres since 2008. The German Blue Angel label for data centres (DE-UZ 228) sets criteria for efficient operation and transparency. The ISO 14001 and ISO 50001 standards certify an environmental or energy management system, not the performance of a data centre. Finally, European delegated regulation 2024/1364 introduces the reporting of PUE, WUE and other indicators by operators of data centres above a certain size, in a European database. Always ask for the scope of the certificate, its date and the certifying body.
On the energy trajectory of infrastructure, see also the data centre rush and the green cloud, reality or myth.
Eco-design services and software
A lighter service calls on less network, fewer servers and fewer powerful devices. Our guide to web eco-design sets out the rules for a website. For AI uses, the question of sobriety arises from the choice of model onwards, as in our analysis of open source AI and ecology.
REEN law, obligations and CSRD
Law no. 2021-1485 of 15 November 2021, known as the REEN law, aims to reduce the environmental footprint of digital technology in France (text on Légifrance). Among its provisions most useful to an organisation:
- A ban on obsolescence practices, including software obsolescence, and information on updates (articles 5 to 11).
- An obligation for sellers of new mobile devices to inform buyers that refurbished offers exist (article 21).
- The State and local authorities must take the repairability index into account in their purchasing from 1 January 2023, then the durability index from 1 January 2026 (article 15). Working equipment that is disposed of must be directed to reuse (article 16).
- Stricter environmental conditions for the reduced tariff applicable to data centres, including the recovery of waste heat and limits on cooling water (article 28).
- Creation of a general eco-design framework for digital services (article 25).
- An obligation for municipalities and groupings of municipalities with more than 50,000 inhabitants to define a responsible digital strategy by 1 January 2025 at the latest (article 35, decree 2022-1084).
The direct obligations therefore mainly target public bodies, sellers and data centre operators. For a private company, the law serves mainly as a purchasing framework and a reference.
As for the CSRD, the sustainability reporting directive includes environmental impacts, among them those of digital technology, in the data that the companies concerned publish. Its scope has been scaled back by the Omnibus package and French transposition is under way: check with your accountant or finance department whether your company is still in scope before launching projects for that reason alone.
Greenwashing and rebound effects
A few signals should raise concern in a Green IT offer or communication:
- A “green cloud” or “carbon neutral” claim with no PUE, WUE, electricity mix or quantified scope.
- Carbon offsetting presented in place of a measured reduction.
- A label that cannot be identified, or a certification whose scope cannot be read.
- A PUE on its own, when it leaves out manufacturing, water and carbon.
- Communication centred on everyday habits (emptying your mailbox) that ignores the renewal of equipment, which is nonetheless dominant.
Rebound effects are the structural limit of the approach. A more efficient device or service costs less to run, and volumes rise. The figures show it: the IEA expects data centre electricity consumption to double by 2030 despite efficiency gains, and ADEME projects a footprint multiplied by three in 2050 without action. Measuring in absolute terms, not only per unit of service, avoids confusing efficiency with reduction. We develop this tension in our article on the paradox of infinite digital and low-tech.
What to measure first?
There is no need to aim for a full assessment from the start: you would lose months on it. In order:
- Take an inventory of your equipment: number of devices by type, age, average holding period, annual replacement rate. This is where most of the impact lies.
- Record electricity consumption of server rooms and hosting, or failing that ask the host for its PUE, its WUE and its electricity mix.
- List outsourced services: cloud, SaaS, backups, with the hosting location of each.
- Convert to emissions using public emission factors, distinguishing manufacturing (purchases) from use, so that both can be tracked over time.
- Set two or three tracking indicators, for example the average life of the equipment and the share of refurbished equipment in purchases.
FAQ: Green IT
What is the difference between Green IT and responsible digital?
Green IT addresses the environmental footprint of digital technology. Responsible digital is broader and adds the social and ethical dimensions, such as accessibility or data use. Green IT is its environmental component.
Should we act first on data centres or on devices?
Both matter, but the 2022 ADEME update attributes 50% of the footprint to devices and 46% to data centres, with manufacturing the largest life-cycle phase. For an organisation, extending the life of its equipment generally delivers the surest gain, before hosting is questioned.
What is the PUE of a data centre?
PUE (Power Usage Effectiveness) is the ratio between the total energy a site consumes and the energy consumed by its IT equipment alone. The closer it gets to 1, the less cooling and losses weigh. It takes no account of carbon, water or the manufacturing of servers.
Is refurbished always better for the environment?
It avoids a new manufacture, but the benefit depends on the parts replaced and on how long the device is used afterwards. A refurbished device sold with a warranty and used for a long time is the favourable case.
Does the REEN law apply to private companies?
Its most direct obligations target local authorities with more than 50,000 inhabitants, public buyers, sellers of devices and data centre operators. A private company mainly meets it as a customer, but can use it as a framework for its purchasing and for its demands on suppliers.
Is a host displaying a label necessarily sustainable?
No. A label or certification applies to a specific scope, date and set of criteria. The ISO 14001 and 50001 standards certify a management system, not a level of performance. Ask for the certificate and its scope, as well as the PUE, the WUE and the electricity mix.
Is Green IT enough to reduce the digital footprint?
Not on its own. Efficiency gains are often offset by rising volumes, which is the rebound effect. The IEA expects data centre electricity consumption to double by 2030. Absolute values need to be tracked, and Green IT combined with eco-design and sober use.
Sources: ADEME, assessment of the environmental impact of digital technology in France (2022 update); Arcep; GreenIT.fr, environmental footprint of digital technology worldwide (2019); International Energy Agency, Energy and AI; REEN law; delegated regulation (EU) 2024/1364; European Code of Conduct for data centres; Blue Angel DE-UZ 228.

Julie Bonazzi explores how design, digital and narratives can transform the way organizations deploy and carry out change. A specialist in digital marketing and brand experience, she has spent more than ten years helping companies and entrepreneurial projects build identities, communication strategies and digital ecosystems.
An entrepreneur, she develops an approach in which design, agility and digital culture become levers to make transformations more intelligible and more engaging.
Julie is the co-founder, with Malika Ait El Mouden, of Twin Transformation.fr


